How to play

Basic play

Requirement

webcam
web broser（like PC, SmartPhone)
Laser based dryfire training kit or laser toygun.

Allow webcam use in your browser.
Add a target frame in the browser and adjust the frame to enclose the real target in the camera image.
- In addition to manually adding target frames to enclose physical targets, you can also use the downloadable target PDF for automatic detection.
When you shoot a target, it responds with a laser and makes a sound.
You can play by selecting various game modes.

Since the color of the laser is detected, please make sure that the object of the same color as the laser does not enter the target frame.
If the webcam is too far away from the target, the laser may not be detected. Shoot at a reasonable distance.

Target list

A list of targets used in the game will be displayed.

In addition to adding from the target list with the Add button, you can automatically detect using a dedicated target PDF file.

You can adjust the shape by dragging the outer frame of the target.

Also, there is no collision detection between the outermost frame and the inner frame of the target, and it will not react even if it hits the laser.

Manual additional target

Targets can be added manually by pressing the Add button at the bottom of the target list.

The selected type of shape, hit sound target is added.

Auto detect target

By printing a dedicated target PDF file and pasting it on the wall, etc., the target can be detected automatically.

Download the target PDF file for your game mode, print it out, and stick it on your wall.

After that, adjust the pasted paper so that it can be seen in the web camera, and press the automatic detection button.

After 3 seconds the target will be auto-detected and added.

Depending on the performance of the webcam, the distance at which automatic detection is possible is approximately 6-9 feets.

Target PDF files

for Steel Challenge

target1(STOP) target2 target3 target4 target5

for APS

target for APS

Game mode

Free mode

This is a free shooting mode.

Please use it for trial firing and laser threshold setting.

Steel Challenge mode

In the Steel Challenge, compete for the speed of shooting 3 to 5 targets.

Shoot all targets except the STOP target, and finally the STOP target.

Targets can be auto-detect targets or manually added targets.

When to use auto-detect targets

Download and print the Steel Challenge target PDF file.

Then, stick it on the wall etc. so that each target fits in the angle of view of the web camera.

Also, keep the distance between the target and the webcam within 6-9 feets.
(If the distance is longer than that, the detection of the laser light spot and the automatic detection of the target tend to be difficult.)

Press the auto detect button to automatically detect the target.

Game settings

Start waiting time: The number of seconds to wait before the game starts.
After the set time has passed after pressing the start button, the voice of “Make Ready.” will be played and the game will start.
String interval: The number of seconds to wait between each string (duration of shooting 5 targets).
After the set time, you will hear a voice saying “Are you ready? standby.” Then it beeps and the string starts.
Number of stages: Set the number of stages. 5 strings count as 1 stage.
Stage interval: Number of seconds to wait between stages.

How to proceed

When you press the start button, after waiting for the number of seconds set in the start waiting time, the sound “Make Ready.”
After waiting for the number of seconds set in String Interval, you hear the start confirmation voice, “Are you ready? Stand by.”, followed by a beep.
Shoot any target other than the STOP target, and finally the STOP target.
If you shoot a STOP target while there are unhit targets, the number of unhit targets x 3 seconds is added to the penalty.
The number of seconds you hit each target + the number of penalty seconds will be the total number of seconds.
After string interval wait seconds, return to 2. Repeat the above 5 times (5 strings).
After completing 5 strings, the score is the total number of seconds in each string, excluding the longest time.
“Unload and show clear.” “Range is clear.”
Repeat the above for the number of stage settings.

APS Bullseye mode

In APS Bullseye mode, compete for accuracy to shoot the specified target.

Shoot the target 5 times in 2 minutes, the closer to the center, the higher the score.

The target uses the auto-detect target for APS.

Target

The target should use a dedicated target.

Print the target PDF file for APS and stick it on the wall so that it fits in the angle of view of the web camera.

Also, the distance between the target and the web camera should be about 30 cm.

Game settings

Start waiting time: The number of seconds to wait before the game starts.
After the set time has passed after pressing the start button, the voice of “Make Ready.” will be played and the game will start.
Round interval: The number of seconds to wait between each round (5 shots in 2 minutes). After the set time, “Bullseye, standby.”, “Ready go!” and the round begins.

How to proceed

When you press the start button, after waiting for the number of seconds set in the start waiting time, the sound “Make Ready.”
After waiting for the number of seconds set in the round interval, you will hear “Bullseye, standby.” and “Ready go!”
Shoot the target 5 times in 2 minutes.
The points are 10 points, 10 points, 8 points, and 5 points from the center.
Hitting a zone outside the circle will result in a miss.
Also, the hit location is displayed in the target image next to the score.
A voice will be heard when 1 minute has passed and 1 minute and 30 seconds have passed.
The round ends after 2 minutes or 5 shots. In the case of the first round, the voice of “Next round.” will flow and proceed to the next round. For the second round, the voice “Game is over.” will be played and the game will end.

Environment setting

webcam setting(Only smart phone): Choose whether to use the front or rear camera.
Laser light threshold: Set the lower and upper limits of color for detecting laser light. By default, it is set to detect red lasers.
Normal: This is a threshold used outside of APS mode. It is set wider to detect hit colors of distant targets.
APS: This is a threshold used in APS mode. It is set narrower to detect hit locations precisely.

Projector

Open on another device: This is the URL to open the screen for the projector on another device.
Open it on the device where the projector is connected.
Open on this device: The screen for the projector will be opened in a pop-up window.
Use the screen extension function of the OS to display an extended screen on the projector, and display the screen for the projector.

Screen for Projector

Set Background: Load the image to be set as the background.
If you use the difference detection function of the original screen target, you can combine a background without a target and a background with a target to perform semi-automatic detection of the target.
Detect Projector Screen: Recognize the projector screen on the original screen, and you can display the hit locations on the projector.
Fit Setting: You can choose the method to fit the background to the screen.