WebCam
- Basic play
- Target list
- Game mode
- Enviroment settings
- Requirement：webcam, laser base dryfire kit, or laser toygun.
- 1. Allow webcam use in your browser.
- 2. Add a target and adjust the frame to enclose it in the camera image.
- 3. When you shoot the target, it will make a sound in response to the laser.
-
Attention
- 1. Since the color of the laser is detected, please make sure that the object of the same color as the laser does not enter the target frame.
- 2. If the distance between the webcam and the target is too far, the laser may not be detected. Shoot at a reasonable distance.
* After adding, you can adjust by dragging the frame in the camera image.
* There is no hit detection for the thin outer frame.
You can automatically detect the specified target with the marker auto-detection button.
After downloading the PDF below, print it out in A4 size and stick it where it can be seen by the camera.
target1(STOP) target2 target3 target4 target5 target for APS
Hit the auto-detect button and the target is set. *The detection distance is about 6-9 feets.
Diff auto-detection button automatically detects the target from the difference between the images before and after the button is pressed.
After starting the detection process, please place the target object within the screen and press the confirm button.
In the Steel Challenge, compete for the speed of shooting 3 to 5 targets.
Shoot all targets except the STOP target, and finally the STOP target.
In APS Bullseye mode, compete for accuracy to shoot the specified target.
Shoot the target 5 times in 2 minutes, the closer to the center, the higher the score.